
By Charles Buell, Real Estate Inspections in Seattle
If you enjoyed this post, and would like to get notices of new posts to my blog, please subscribe via email in the little box to the right. I promise NO spamming of your email
Consulting on Building Science and Forensics in the Seattle Area (Formerly Charles Buell Inspections INC)

By Charles Buell, Real Estate Inspections in Seattle
If you enjoyed this post, and would like to get notices of new posts to my blog, please subscribe via email in the little box to the right. I promise NO spamming of your email

Would you want a credit card that worked even after you have maxed out your credit limit?
Even after the card has expired”?
Let me tell you about the all new all new “forever card.” Just like Forever Stamps—-once you get this card it works “forever” whether you go bankrupt or get divorced—-even if the bank itself goes belly up.
And while it may not be worth a damn if you want to buy something—it will get you in the house when you loose your key—-or your “X” locks you out.
IF—–(There is always an “if” isn’t there?)
If, your lockset is not installed properly, the credit card can get you in the door in a jiffy.
IF—–(Yup—-there is yet another “if.”)
If, the door does not have a dead-bolt, or the dead-bolt has not been locked, the credit card can get you in the door in a jiffy.
The picture below is what a normal latch bolt looks like that has a “security pin.” The security pin is that little half cylinder shaped thingy on the latch bolt.

In this next picture you can see the security pin depressed into the edge of the door.

Under normal operation, the latch bolt enters the hole in the jamb but the pin stays recessed in the edge of the door. You see, if the security pin stays in the edge of the door the latch bolt should not be able to be pushed into the edge of the door when the door is locked. In the unlocked position both latch bolt and security pin easily push into the edge of the door.
In the “locked” position this pin should stay “inside” the edge of the door. If it enters the strike plate on the door jamb—-the door can often be credit-carded to open the door.
Essentially what this means is that the door is NOT ACTULLY LOCKED—if the security pin enters the strike plate.
The picture to the right is of a normal strike plate. The security pin should not enter the rectangular opening made for the latch bolt.
The above scenario is for “in-swinging” doors.
The same condition on an “out-swinging” door (without a security latch cover) makes entry even easier—-only this time one would use a pocket knife instead of a credit card. The solution is to move the strike plate toward the weather-stripping enough to prevent the pin from entering the hole—-usually 1/8” or less.
Because there can be lots of other variables and because this is a personal safety issue, this repair should only be done by someone that knows what they are doing. Doors that have metal interlocking types of weather-stripping are much less vulnerable to this defect. Doors that have the cushy foam type weather-stripping are the most vulnerable.
I find this condition on nearly 80% of all doors with this type of a lockset—-so go check yours now—-and report back here what you discover. Of course doors with dead-bolts make the door secure—regardless of what is going on with the hand-set.
By Charles Buell, Real Estate Inspections in Seattle
If you enjoyed this post, and would like to get notices of new posts to my blog, please subscribe via email in the little box to the right. I promise NO spamming of your email
There are many security issues related to exterior doors. Home security is always relative to how bad someone wants to get in. For example a sliding glass door is only as secure as the nearest brick or planter. The problem with that approach to opening doors is that it is VERY NOISY and therefore avoided by most intruders. That said, we like to do what we can to make our doors as secure as possible—-without being an “open” invitation.

Today I am only going to focus on exterior “out-swinging” doors, and the issue of “security type hinges.” Out-swing exterior doors should have hinges installed with hinges that either have hinge halves that interlock or that have pins with set screws. These set-screw type hinges are the most common in my area—-when they are there. Sometimes they are present but the set screw is missing. When it is missing the hinge is then no different than any regular hinge where the pin can be removed.
The purpose of these security type hinges is that you don’t want to be able to remove the pins and thus be able to remove the door regardless of whether it is locked or not. This is a very simple fix and is simply a matter of changing one of the hinges to the type that has a set screw. I would guess that about 50 percent of the out-swing doors I inspect, as a Seattle Home Inspector, do not have hinges with security-pins. About 10 percent of the ones that do, have missing set screws.
If you have out-swinging exterior doors you should check to see if at least one of the hinges is a security type hinge—-either the interlocking type, or the security-pin type. If it is the security-pin type, does it have a set screw in place?
Amongst all the rust and less than professional painting—-or the need for painting—-can you see the set-screw at the center of the hinge in the picture above?
Charles Buell, Seattle Home Inspector
If you enjoyed this post, and would like to get notices of new posts to my blog, please subscribe via email in the little box to the right. I promise NO spamming of your email